Small Sailboat - example build

Wallas 2000 t is a forced air kerosene boat heater designed to replace older 1800 t and 2400 t models. With its improved temperature control features and low power consumption, it is a great choice for smaller boats even for icy cold conditions.  It comes with an easy-to-use thermostatic control panel, which can be set to maintain a target temperature or used in Manual Mode with two powers levels – full power at 2 kW or half power at 0.9kW. The 2000t model has two warm air outlets with maximum run of 15' of vent hose per outlet.

• The kerosene heaters are designed for smaller vessels up to–30 feet
• Heating Output: 0.9–2.0 kW
• Heating Output: 3000–6800 BTU's
• Operating Voltage: 12V
• Fuel Consumption: 0.1–0.2 l/h
• These unit can only consume kerosene
• Power Consumption: 0.4–0.7A
• Dimensions: 10 5/32" tall x 14 5/16" long x 4 15/16" wide
• Note: this price does not include install kit – #2000t Kerosene Heater Install Kit

Download 2000t  brochure Download Installation, Operation, and Service Instructions Manual

10 Litre fuel tank (7-5/8" Tall x 15" x 8-1/4")

Coaxial Exhaust. 28/45mm insulating sock for exhaust tubing ($35 per foot)

Fibre glass sock for 48mm exhaust ($5 per foot)

Standard exhaust thru hull for coaxial exhaust

60mm hot air ducting ($8 per foot)

60mm hot air outlets w/ damper

Fuel line assembly for 5 or 10 Litre fuel tank

5 Litre fuel tank 12" tall x 8"w x 5"d

Fuel solenoid valve 12v (if fuel level is above unit)

28/48mm deck exhaust outlet (sealable when not in use) Diagram and Assembly instructions Video description

75mm to 60mm duct adapter

60mm stainless 3-way divider for hot air ducting

75mm air duct silencer

75mm bulkhead thru hull

75mm  3-way Y hot air ducting

75mm cold air return stainless grill

75mm cold air return plastic grill

75mm hot air ducting

Standard 75mm black air outlet vent with adjustable internal baffle